105 CHROMECOAT

105 CHROMECOAT is a lead free quick drying enamel – based on a very fine aluminium flake which produces a unique bright and smooth “ chrome like “ finish.
                                                    It is suitable for use on both interior and exterior surfaces and has excellent heat resistance up to 200˚C ( not continuous exposure ).

300 Quick Drying Enamel

300 LINE QUICK DRYING ENAMEL is a fast air dry spraying enamel based on a copolymer alkyd resin and pigmented with the highest quality light fast pigments.

It is designed as a general purpose industrial enamel for use where speed of dry is important, and can be applied over most properly prepared surfaces, including metal and timber. 

Typical uses are on sheet steel, agricultural equipment, vehicle chassis, engines, furniture, cabinets and electrical switchboards

304 Equipment Enamel

304 EQUIPMENT ENAMEL is a general purpose spraying enamel based on a blend of alkyd resins and pigmented with the highest quality light fast pigments.

It is a moderately fast drying, high gloss, hard and durable coating suitable for all industrial applications, and can be applied over most sound and properly prepared surfaces including metal and timber. 

It is ideally suited for finishing of sheet steel, agricultural machinery, earth moving equipment, vehicle chassis, trays, engines, electric motors, etc.

311 LINE HAMMERTONE

311 LINE HAMMERTONE is a fast air dry spraying enamel based on a copolymer alkyd resin and pigmented with the highest quality light fast pigments and aluminium flake to give a decorative patterned finish.

It is designed as a general purpose industrial enamel pattern finish for use where speed of dry is important, and can be applied over bare steel or properly prepared surfaces, including metal and timber.  Typical uses are on sheet steel, agricultural equipment, vehicle chassis, engines, furniture, cabinets and electrical switchboards.

330 Acrylic Lacquer

330 ACRYLIC LACQUER is a premium quality thermoplastic acrylic lacquer designed for the repair and refinishing of motor vehicles. It has been developed in Australia for Australian conditions, and is based on the latest and most innovative paint technology.

330 ACRYLIC LACQUER TINTING SYSTEM consists of a range of acrylic lacquer tinters pigmented with the highest quality, light fast, automotive grade pigments. These tinters are carefully standardised and controlled to ensure uniformity of both tint strength and tone. Colour mixing formulations for most vehicle manufacturers colours are available dating back to 1965, and the colour formulae range is constantly reviewed and increased as new model colours become available.

Basecoat tinters have been specifically introduced to allow the ready matching of modern vehicles which are painted in clear over base finishes. Colours mixed using basecoat tinters must be overcoated with 512 ACRYLIC LACQUER SUPER CLEAR to duplicate the depth and metallic pattern of original clear over base finishes.

401 QD Zinc Phosphate Primer

401 QD ZINC PHOSPHATE PRIMER is a high build, quick drying industrial primer. It contains zinc phosphate for corrosion inhibition.

 401 QD ZINC PHOSPHATE PRIMER is fast drying with excellent adhesion to suitably prepared substrates and exhibits very good gloss hold-out when overcoated with a quick dry enamel finish.

401 QD ZINC PHOSPHATE PRIMER dries to a matt finish. USES ideally suited as an anti-corrosive primer for general structural steel, roofs, machinery and other equipment on good, clean and scale free surfaces.

402 Zinc Phosphate Primer

402 ZINC PHOSPHATE PRIMER is an alkyd resin based general purpose industrial primer. It contains zinc phosphate for corrosion inhibition.

402 ZINC PHOSPHATE PRIMER is relatively fast drying with excellent adhesion to suitably prepared substrates and exhibits very good gloss hold-out when overcoated with enamel finishes

404 6291 NS Primer Undercoat

404 N/S PRIMER / UNDERCOAT is a high build, zinc phosphate, alkyd resin based  primer for use with alkyd enamels and two pack topcoats. 

It is a relatively fast drying with excellent durability. It is recoatable “wet on wet” and does not need to be sanded to give excellent topcoat adhesion and gloss hold out

406 Two pack Etch Primer

A two pack Polyvinyl Butyral based etching primer designed to promote maximum adhesion of conventional top coats to properly cleaned ferrous and most non - ferrous metal surfaces

408 Epotec Primer Surfacer

A polyamide cured epoxy primer surfacer, for use on metal, wood, masonry and fibreglass  as the base coat for 370 EPOTEC TWO PACK EPOXY ENAMEL and 600 DURATEC POLYURETHANE ENAMEL topcoats.

421 SINGLE PACK ETCH PRIMER

A single pack Polyvinyl Butyral based etching primer designed to promote maximum adhesion of conventional top coats to properly cleaned ferrous and most non - ferrous metal surfaces.

426 Etchpro

426 Vinyl Etch Primer

426 VINYL ETCH PRIMER is a unique single pack fast drying primer which has outstanding adhesion to all metal surfaces including non-ferrous metals and chrome plated steel.

Unlike conventional etch primers which can only be applied in extremely thin coats, 426 VINYL ETCH PRIMER can be applied in heavy coats like a normal primer and exhibits good build and hold out.

Due to its satin finish, sanding is not normally necessary, but 426 VINYL ETCH PRIMER can be sanded if desired

429 PARAPHOS PRIMER SURFACER

429 PARAPHOS PRIMER SURFACER is a two-pack high build etching primer surfacer with outstanding adhesion to most metal surfaces including aluminium It contains corrosion inhibiting pigments and must be used under 443 PARAFILL HS FILLER/SURFACER on bare metal surfaces.

It is a fast drying primer surfacer suitable for both new work and repairs on automobile and transport vehicle bodies to be finished in two pack top coats such as 606 PARAGLAZE ACRYLIC URETHANE ENAMEL.

432 Acrylic Primer Surfacer

432 ACRYLIC PRIMER SURFACER is a premium fast drying, high build primer surfacer especially formulated for use with 330 ACRYLIC LACQUER top coats in Automotive refinishing

434 Spray Primer Filler SFP-60

434 SPRAY PRIMER FILLER SPF-60 is a premium fast drying, high build one step, spray primer surfacer especially formulated for use with PROTEC AUTOMOTIVE FINISHING COATS.

SPF-60 is formulated for direct application over Bare Metal, Body Filler,Fibreglass Repairs and minor damage such as stone chips and pitting

440 - 9311 PP Plastic Primer

440 PP PLASTIC PRIMER is an adhesion promoting primer for all difficult to paint plastic surfaces including polypropylene and polycarbonate.

It is suitable for use on all bare plastic parts and is essential in providing adhesion, flexibility and preventing solvent attack on sensitive plastics

Parafil HS Filler Surfacer

443 PARAFILL HS is a technologically advanced two-pack urethane filler with excellent filling properties, minimal shrinkage and very rapid cure.

Depending on the degree of thinning it can be used not only as a filler, but also as a high build primer and primer surfacer. It gives excellent hold out to all two component basecoat and topcoat systems used in automotive refinishing.

It is the ideal foundation for PROTEC 606 PARAGLAZE ACRYLIC URETHANE ENAMEL and PROTEC 706 BASECOAT/CLEARCOAT SYSTEM

512 - 9210 Acrylic Lacquer Super Clear

512 ACRYLIC LACQUER SUPER CLEAR is a premium quality thermoplastic acrylic lacquer specifically developed for use over  330 ACRYLIC LACQUER metallic colours.

It is highly resistant to outdoor weathering and UV degradation, and exhibits outstanding durability, resistance to yellowing and adhesion

604 Acrylic Urethane Enamel

604 ACRYLIC URETHANE ENAMEL is a premium quality, high performance, two pack acrylic urethane coating.  It has been developed in Australia, for Australian conditions, and has superior resistance to U.V.  degradation when compared to most imported similar products.

604 ACRYLIC URETHANE ENAMEL is ideally suited for the repair and refinishing of motor vehicles because of its ease of use.  Although it can be low baked, its extremely fast curing properties allow it to air dry satisfactorily at normal ambient temperatures thus negating the necessity for heated booths.

In addition, its unique formulation and solvent balance allow it to be used with conventional one pack primers and putties such as 432 ACRYLIC PRIMER SURFACER. It can also be applied direct to clean baked enamel and two pack enamel surfaces.

606-9550 ACCELERATOR ADDITIVE

606-9550 ACCELERATOR ADDITIVE has been specially formulated for use  with 606 PARAGLAZE ACRYLIC URETHANE ENAMEL solid colours and enables shorter baking times and harder films to be achieved, which can be polished sooner than when using just conventional hardener.

606 PARAGLAZE ACRYLIC URETHANE ENAMEL

606 PARAGLAZE ACRYLIC URETHANE ENAMEL is a premium quality two pack acrylic urethane enamel specifically designed for low bake oven curing, although it will air dry satisfactorily under normal conditions. It has been developed in Australia for maximum performance under Australian conditions with outstanding resistance to outdoor weathering and U.V. degradation. 606 PARAGLAZE ACRYLIC URETHANE ENAMEL is ideally suited for the repair and refinishing of all road transport vehicles including cars, trucks and buses, whenever a high quality finish is desired.

606 Paraglaze MS Clear

606 MS CLEAR is a premium quality, medium solids, two pack acrylic urethane enamel product specifically designed for low bake oven curing, although it will air dry satisfactorily under normal conditions.

It has been developed in Australia for maximum performance under Australian conditions with outstanding resistance to outdoor weathering and U.V. degradation and exhibits outstanding results when used over 706 PARAGLAZE BASECOAT in a clear on base system.

606 PARAGLAZE MS CLEAR is ideally suited for the repair and refinishing of all road transport vehicles including cars, trucks and buses, whenever a high quality finish is desired.

612 - 9733 Triple X Clear

612 TRIPLE X CLEAR is a premium quality two pack acrylic / urethane clear with exceptional fast drying properties.

It has been specifically formulated for use in spot and single panel repair, door jambs, etc. It dries too fast for large panel repair and overall refinishing.

620 BARRCRYL ICF

ISOCYANATE FREE ACRYLIC TWO PACK FINISH

FAST DRYING

OUTSTANDING GLOSS RETENTION AND RESISTANCE TO WEATHERING

READILY RECOATABLE WITH MINIMUM PREPARATION

EXCELLENT TOUGHNESS AND ABRASION RESISTANCE

AU – 625 POLYTHANE

HIGH PERFORMANCE DURABLE TWO PACK ACRYLIC POLYURETHANE FINISH

OUTSTANDING GLOSS

EXCELLENT DURABILITY

RECOATABLE WITH MINIMUM SURFACE PREPARATION

SUPERIOR OPACITY

706 Paraglaze Basecoat

706 PARAGLAZE  BASECOAT is a uniquely formulated, premium quality, high durability acrylic basecoat designed for the repair and refinishing of motor vehicles. It has been developed in Australia for Australian conditions, and is based on innovative technology.

706 PARAGLAZE BASECOAT TINTING SYSTEM consists of a range of individual tinters pigmented with the highest quality, light fast, automotive grade pigments. These tinters are carefully standardised and controlled to ensure uniformity of both tint strength and tone. Complimentary to these liquid tinters are Special Effect Powder Pearl tinters which have been specifically introduced to allow the ready matching of modern vehicle colours.

706 PARAGLAZE BASECOAT is specially designed to be over coated with two pack 606 PARAGLAZE ACRYLIC URETHANE CLEAR to achieve the brilliant " wet - look " appearance required in modern vehicle refinishing.

971 - 9119 Metal Conditioner & Degreaser

971 METAL CONDITIONER & DEGREASER is a phosphoric acid based metal pretreatment. It facilitates removal of oil, grease and rust as well as chemically etching the metal surface to ensure optimum adhesion of subsequent primer coats