105 CHROMECOAT

105 CHROMECOAT is a lead free quick drying enamel – based on a very fine aluminium flake which produces a unique bright and smooth “ chrome like “ finish.
                                                    It is suitable for use on both interior and exterior surfaces and has excellent heat resistance up to 200˚C ( not continuous exposure ).

304 Equipment Enamel

304 EQUIPMENT ENAMEL is a general purpose spraying enamel based on a blend of alkyd resins and pigmented with the highest quality light fast pigments.

It is a moderately fast drying, high gloss, hard and durable coating suitable for all industrial applications, and can be applied over most sound and properly prepared surfaces including metal and timber. 

It is ideally suited for finishing of sheet steel, agricultural machinery, earth moving equipment, vehicle chassis, trays, engines, electric motors, etc.

308 - 7020 Tyre Paint - Black

330 Acrylic Lacquer

330 ACRYLIC LACQUER is a premium quality thermoplastic acrylic lacquer designed for the repair and refinishing of motor vehicles. It has been developed in Australia for Australian conditions, and is based on the latest and most innovative paint technology.

330 ACRYLIC LACQUER TINTING SYSTEM consists of a range of acrylic lacquer tinters pigmented with the highest quality, light fast, automotive grade pigments. These tinters are carefully standardised and controlled to ensure uniformity of both tint strength and tone. Colour mixing formulations for most vehicle manufacturers colours are available dating back to 1965, and the colour formulae range is constantly reviewed and increased as new model colours become available.

Basecoat tinters have been specifically introduced to allow the ready matching of modern vehicles which are painted in clear over base finishes. Colours mixed using basecoat tinters must be overcoated with 512 ACRYLIC LACQUER SUPER CLEAR to duplicate the depth and metallic pattern of original clear over base finishes.

369 - UAE

369 UAE is a high performance aliphatic isocyanate resin solution used as an additive to both 363 AUTOMOTIVE ENAMEL and 304 EQUIPMENT ENAMEL to improve drying, hardness, chemical resistance, gloss and durability.

394 FLEX

394 FLEX ADD is a flexibilizing additive for use with AUTOMOTIVE TWO PACK REFINISH TOPCOATS and 330 ACRYLIC LACQUER for painting of flexible exterior plastics used on current motor vehicles. 394 FLEX ADD is designed for use with

408 Epotec Primer Surfacer

A polyamide cured epoxy primer surfacer, for use on metal, wood, masonry and fibreglass  as the base coat for 370 EPOTEC TWO PACK EPOXY ENAMEL and 600 DURATEC POLYURETHANE ENAMEL topcoats.

421 SINGLE PACK ETCH PRIMER

426 Vinyl Etch Primer

426 VINYL ETCH PRIMER is a unique single pack fast drying primer which has outstanding adhesion to all metal surfaces including non-ferrous metals and chrome plated steel.

Unlike conventional etch primers which can only be applied in extremely thin coats, 426 VINYL ETCH PRIMER can be applied in heavy coats like a normal primer and exhibits good build and hold out.

Due to its satin finish, sanding is not normally necessary, but 426 VINYL ETCH PRIMER can be sanded if desired

429 PARAPHOS PRIMER SURFACER

429 PARAPHOS PRIMER SURFACER is a two-pack high build etching primer surfacer with outstanding adhesion to most metal surfaces including aluminium It contains corrosion inhibiting pigments and must be used under 443 PARAFILL HS FILLER/SURFACER on bare metal surfaces. It is a fast drying primer surfacer suitable for both new work and repairs on automobile and transport vehicle bodies to be finished in two pack top coats such as 606 PARAGLAZE ACRYLIC URETHANE ENAMEL.

432 Acrylic Primer Surfacer

432 ACRYLIC PRIMER SURFACER is a premium fast drying, high build primer surfacer especially formulated for use with 330 ACRYLIC LACQUER top coats in Automotive refinishing

434 Spray Primer Filler SFP-60

434 SPRAY PRIMER FILLER SPF-60 is a premium fast drying, high build one step, spray primer surfacer especially formulated for use with PROTEC AUTOMOTIVE FINISHING COATS.

SPF-60 is formulated for direct application over Bare Metal, Body Filler,Fibreglass Repairs and minor damage such as stone chips and pitting

437 - 6205 2K Bumper Primer

437-2K BUMPER PRIMER is a two pack acrylic urethane primer designed specifically for use on plastic bumper repairs.

It gives excellent hold out and adhesion under Acrylic Lacquer  & 2K topcoats

440 - 9255 PE Plastic Primer

POLYETHYLENE PLASTIC PRIMER is an adhesion promoting primer for use on polyethylene plastic components.

440 - 9311 PP Plastic Primer

440 PP PLASTIC PRIMER is an adhesion promoting primer for all difficult to paint plastic surfaces including polypropylene and polycarbonate.

It is suitable for use on all bare plastic parts and is essential in providing adhesion, flexibility and preventing solvent attack on sensitive plastics

442 - 6299 Carmaster 2K Primer

442 CARMASTER 2K PRIMER FILLER (4:1) is a two pack urethane spraying filler with excellent filling properties, minimal shrinkage and rapid cure.

It gives excellent hold out to all two component top coats and in conjunction with a suitable etch primer is the ideal foundation for CARMASTER 2K ENAMEL

443 Parafil HS Filler Surfacer

443 PARAFILL HS is a technologically advanced two-pack urethane filler with excellent filling properties, minimal shrinkage and very rapid cure.

Depending on the degree of thinning it can be used not only as a filler, but also as a high build primer and primer surfacer. It gives excellent hold out to all two component basecoat and topcoat systems used in automotive refinishing.

It is the ideal foundation for PROTEC 606 PARAGLAZE ACRYLIC URETHANE ENAMEL and PROTEC 706 BASECOAT/CLEARCOAT SYSTEM

445 1K Bumper Primer

445 1K BUMPER PRIMER is a high viscosity, fast drying acyclic primer specifically designed to be used as a flexible primer over a range of automotive plastic trim substrates including bumper, grills and louvres

458 - 6355 Primer Surfacer

458 PRIMER SURFACER is a unique, single pack, chromate-free, anti-corrosive, fast drying primer surfacer for use under 2 pack paint systems.

458 PRIMER SURFACER has good adhesion to bare metal and most existing paint systems, has good filling and sanding properties, and has good “ hold out “ to most 2K topcoats.

458 PRIMER SURFACER is suitable to be used under 706 PARAGLAZE BASECOAT , 606 PARAGLAZE ACRYLIC URETHANE ENAMEL and 604 ACRYLIC URETHANE ENAMEL.
458 PRIMER SURFACER is primarily recommended for use on spot or small repairs, & is not recommended for multi-panel repairs or full resprays. 

Not to be used over Acrylic Lacquer, nor under polyester fillers

512 - 9210 Acrylic Lacquer Super Clear

512 ACRYLIC LACQUER SUPER CLEAR is a premium quality thermoplastic acrylic lacquer specifically developed for use over  330 ACRYLIC LACQUER metallic colours.

It is highly resistant to outdoor weathering and UV degradation, and exhibits outstanding durability, resistance to yellowing and adhesion

604 Acrylic Urethane Enamel

604 ACRYLIC URETHANE ENAMEL is a premium quality, high performance, two pack acrylic urethane coating.  It has been developed in Australia, for Australian conditions, and has superior resistance to U.V.  degradation when compared to most imported similar products.

604 ACRYLIC URETHANE ENAMEL is ideally suited for the repair and refinishing of motor vehicles because of its ease of use.  Although it can be low baked, its extremely fast curing properties allow it to air dry satisfactorily at normal ambient temperatures thus negating the necessity for heated booths.

In addition, its unique formulation and solvent balance allow it to be used with conventional one pack primers and putties such as 432 ACRYLIC PRIMER SURFACER. It can also be applied direct to clean baked enamel and two pack enamel surfaces.

606-9550 ACCELERATOR ADDITIVE

606-9550 ACCELERATOR ADDITIVE has been specially formulated for use  with 606 PARAGLAZE ACRYLIC URETHANE ENAMEL solid colours and enables shorter baking times and harder films to be achieved, which can be polished sooner than when using just conventional hardener.

606 PARAGLAZE ACRYLIC URETHANE ENAMEL

606 PARAGLAZE ACRYLIC URETHANE ENAMEL is a premium quality two pack acrylic urethane enamel specifically designed for low bake oven curing, although it will air dry satisfactorily under normal conditions. It has been developed in Australia for maximum performance under Australian conditions with outstanding resistance to outdoor weathering and U.V. degradation. 606 PARAGLAZE ACRYLIC URETHANE ENAMEL is ideally suited for the repair and refinishing of all road transport vehicles including cars, trucks and buses, whenever a high quality finish is desired.

606 Paraglaze MS Clear

606 MS CLEAR is a premium quality, medium solids, two pack acrylic urethane enamel product specifically designed for low bake oven curing, although it will air dry satisfactorily under normal conditions.

It has been developed in Australia for maximum performance under Australian conditions with outstanding resistance to outdoor weathering and U.V. degradation and exhibits outstanding results when used over 706 PARAGLAZE BASECOAT in a clear on base system.

606 PARAGLAZE MS CLEAR is ideally suited for the repair and refinishing of all road transport vehicles including cars, trucks and buses, whenever a high quality finish is desired.

612 - 9733 Triple X Clear

612 TRIPLE X CLEAR is a premium quality two pack acrylic / urethane clear with exceptional fast drying properties.

It has been specifically formulated for use in spot and single panel repair, door jambs, etc. It dries too fast for large panel repair and overall refinishing.

620 BARRCRYL ICF

ISOCYANATE FREE ACRYLIC TWO PACK FINISH

FAST DRYING

OUTSTANDING GLOSS RETENTION AND RESISTANCE TO WEATHERING

READILY RECOATABLE WITH MINIMUM PREPARATION

EXCELLENT TOUGHNESS AND ABRASION RESISTANCE

706 Paraglaze Basecoat

706 PARAGLAZE  BASECOAT is a uniquely formulated, premium quality, high durability acrylic basecoat designed for the repair and refinishing of motor vehicles. It has been developed in Australia for Australian conditions, and is based on innovative technology.

706 PARAGLAZE BASECOAT TINTING SYSTEM consists of a range of individual tinters pigmented with the highest quality, light fast, automotive grade pigments. These tinters are carefully standardised and controlled to ensure uniformity of both tint strength and tone. Complimentary to these liquid tinters are Special Effect Powder Pearl tinters which have been specifically introduced to allow the ready matching of modern vehicle colours.

706 PARAGLAZE BASECOAT is specially designed to be over coated with two pack 606 PARAGLAZE ACRYLIC URETHANE CLEAR to achieve the brilliant " wet - look " appearance required in modern vehicle refinishing.

971 - 9119 Metal Conditioner & Degreaser

971 METAL CONDITIONER & DEGREASER is a phosphoric acid based metal pretreatment. It facilitates removal of oil, grease and rust as well as chemically etching the metal surface to ensure optimum adhesion of subsequent primer coats

R123 - HD Wax and Grease Remover

R123 H D WAX & GREASE REMOVER is a specially formulated cleaning solvent preparation for removal of wax , grease, tar and silicone polish residues from most surfaces including automotive finishes.